Placing the 125ml Erlenmeyer flask underneath, and starting to titrate, until the pink color of phenolphthalein just disappeared, in which the end-point was reached, and the final reading of the burette was recorded. Putting the 250ml Erlenmeyer flask back on to the magnetic stirrer with a stir bar inside and turn on both heat and its stirring function. A digital thermometer was put into the solution to give out the real-time temperature. When the temperature was in between 60-80 °C, the setting of the plate was adjusted for the temperature to maintain a at 72 +/- 1 °C for 5 mins. A heat resistant pad was used to remove the flask from the plate, and the stirrer was turned off. Then, the same process used in filtering and titrating room temperature Ca(OH)2 solution was used, except that after filtering, solution was cool down a little first and 10ml instead of 5ml of Ca(OH)2 was transferred to be titrated. The same process was repeated for filtering and titrating boiling Ca(OH)2, except once the solution was boiling, just let it boil for 5 mins, there was no need to adjust the
Placing the 125ml Erlenmeyer flask underneath, and starting to titrate, until the pink color of phenolphthalein just disappeared, in which the end-point was reached, and the final reading of the burette was recorded. Putting the 250ml Erlenmeyer flask back on to the magnetic stirrer with a stir bar inside and turn on both heat and its stirring function. A digital thermometer was put into the solution to give out the real-time temperature. When the temperature was in between 60-80 °C, the setting of the plate was adjusted for the temperature to maintain a at 72 +/- 1 °C for 5 mins. A heat resistant pad was used to remove the flask from the plate, and the stirrer was turned off. Then, the same process used in filtering and titrating room temperature Ca(OH)2 solution was used, except that after filtering, solution was cool down a little first and 10ml instead of 5ml of Ca(OH)2 was transferred to be titrated. The same process was repeated for filtering and titrating boiling Ca(OH)2, except once the solution was boiling, just let it boil for 5 mins, there was no need to adjust the